Prestonett Ready Mixed Quick Dry Filler 200ml
Prestonett Ready Mixed Quick Dry Filler is a pre-prepared and fast drying filler. It can be easily applied with the use of either a filling knife or a flat edged trowel up to a thickness of 3mm.
£5.40 £4.50
Availability: In stock
SKU
70341-001
Prestonett Ready Mixed Quick Dry Filler is a pre-prepared and fast drying filler. It can be easily applied with the use of either a filling knife or a flat edged trowel up to a thickness of 3mm. Once the filler has dried it can be overcoated with either a primer, conventional paint or lightweight wall coverings and is suitable for a wide range of surfaces, such as:
- Brick
- Cellular concrete
- Cement
- Plaster and plaster board
- Polystyrene
- Primed wood
- Stone
Directions For Use
Ensure the project area is clean and free of debris, offering a firm surface for the filler to adhere to.
- Clean the project area with a suitable detergent if oil and grease are present and then thoroughly rinse away any residue
- Remove any debris or loose fitting substrate to form a firm surface for Prestonett Ready Mixed Quick Dry Filler to adhere to
- Use in a well ventilated are and avoid direct contact with skin and eyes
Application
Always do a test area before starting the project to assess the suitability and final finish. Also, follow the manufacturer's instructions for optimum results.
- Avoid applying the filler in temepratures below 5°C and above 35°C
- Massage the tube to ensure the filler is properly mixed before applying
- Insert the paste into the cracks, holes and blemishes with the use of a filler knife
- Prestonett Ready Mixed Quick Dry Filler can be applied in up to 3mm thickness
- Apply the filler from the bottom upwards, ensuring no air pockets remain and that the cavity is fully packed
- Unlimited working time and once dry it can be overcoated
Write Your Own Review