EazyMix Halftime Plaster Accelerator

What Is It?

Halftime Plaster Accelerator is a chemical additive for use with finishing plaster. The additive speeds up the curing process of the plaster by speeding up the chemical crystal formation that causes plaster to set or harden. Halftime is recommended for shortening the setting time of finishing plaster. Halftime will shorten the setting time by up to 60 minutes, depending on the ambient temperature and relative humidity of the working environment.

User Instructions

Halftime is an additive that reduces the setting time of finishing plaster.

Please follow the user instructions carefully. 

Failure to follow the instructions may lead to application issues.

5 SIMPLE STEPS

FOR REDUCING PLASTER SETTING TIMES BY UP TO 60 MINUTES

1. Pour clean fresh water into a mixing bucket

2. Open Halftime sachet and whisk thoroughly

3. Gradually add plaster and whisk thoroughly

4. Continue adding and whisking plaster until smooth, lump free and it reaches the desired consistency 

5. Apply exactly as normal plaster and enjoy up to 60 minutes extra time before the plaster sets.

Warnings

-Avoid direct contact with eyes and skin.

-Wear eye protection, protective gloves, long-sleeved clothing and trousers to prevent direct contact.

-If eye contact occurs, immediately flush thoroughly with water for 30 minutes and seek immediate medical advice.

-Wash thoroughly with soap and water after use.

-Do not ingest.  If ingested, seek medical advice immediately.

-Once opened use within 48 hours.  For best before date see individual sachet.

​

Eazymix Limited's only obligation shall be, to replace such quantities of product proved to be defective.  The user shall determine the suitablility in connection therewith.  Since the product is used under conditions beyond our control, we cannot assume any liability for the results obtained or damage incurred in excess of the purchase price of the above mentioned product.